Viltrox MC-C3 LCD Timer Remote Shutter Release Control Cable Cord for Canon 7D II 6D II 5DS 5D Mark IV 5DIII 50D 40D 30D 20D 10D
It meets the characteristics indicated.
Track tracked. The order came very quickly, in 10 days. The timer works, performs its functions.
Very fast delivery, thanks to the seller. The product is packed in branded packaging. Instruction in english and chinese. I haven't checked in yet.
The seller sent the parcel very quickly. Reached st. petersburg for 12 days. It's almost a record. The only negative: the box of the console was strongly wrinkled. If the seller in the future will take care of the presentation, it is necessary to put in another box, not in a packing bag. For those who buy a timer remote: functionally, the counter can be set to a maximum of 399 controlled shutter positives or an unlimited number. The latter will require the control of the photographer over the whole process.
Very good timer
Store Name: VILTROX Official Store
Rating: 4.8 / 5.0
Spesification
Description
Introduction:
- Except for replicating all functions of a camera\'s shutter release button, it still has the function of Self-Timer, Interval Timer, Long-Exposure Timer and Exposure Count.
- Good for time-lapse photography such as flowers blooming and astrophotography.
- LCD panel can be illuminated
Feature:
--Delay / Self Timer (DELAY)
Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds.
--Interval Timer (INTVL)
The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached.
--BULB/Long Exposure (LONG)
It allows you to take time exposures up to 100 hours long.
--Exposure Count (N)
This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times.
Specification:
| Timer delay | 0s to 99hrs 59min 59s in one-second increments |
| Exposure time | 0s to 99hrs 59min 59s in one-second increments |
| Interval | 1s to 99hrs 59min 59s in one-second increments |
| Number of shots | 1 to 399,-- (unlimited) |
| Power source | Two AAA 1.5V LR03 alkaline batteries (not included) |
| Battery life | Approximately two months of continuous shooting with a delay of 5min, an exposure time of 4min 56s, and an interval of 5min. Use of the illuminator will reduce battery life |
| Operating temperature | -20 -- +50? (-4 -- +122?) |
| Dimensions | Approximately 155 x 40 x 18 mm (6.1 x 1.6 x 0.7 in), excluding projections |
| Weight | Approximately 105g (3.7oz), excluding ferrite core |
| Length of cord | Approximately 850mm (33.5in)z |
Suitable For
Canon EOS-1D X / 1Ds Mark III / 1Ds Mark II / 1Ds / 1D Mark IV / 1D Mark III / 1D Mark II N / 1D Mark II / 1D / EOS D2000 / 6D Mark II /5D Mark IV/ 5D Mark III / 5DS / 5DS R / 5D Mark II / 5D / 6D / 7D Mark II / 7D / 60Da / 50D / 40D / 30D / 20D / 10D / D60 / 30 /EOS-1V / EOS-3
Package Content
Timer Remote Cord x1
English Instruction Manual x1
Battery is not included.
Package Detail
- Unit Type:piece
- Package Weight:0.2kg (0.44lb.)
- Package Size:10cm x 5cm x 5cm (3.94in x 1.97in x 1.97in)
